Gentex machine (waterjet and sludge extractor)

– Piston pump type (Plunger Pump) with ceramic pistons made in Western Europe

– Type of vacuum pump: watering (watering) with the ability to work with the penetration of water and sewage into it

Suction depth 1.9m (from sea level)

Waterjet propulsion from car P.T.O or Split Shaft, both systems are equipped with intelligent disconnection system when overload

– The driving force of the vacuum pump from the car PTO or independent motor or Split Shaft, all three systems of which are equipped with intelligent shut-off system in case of additional load

– Water tank capacity from 4,000 to 10,000 liters depending on the type of vehicle

– Sludge storage tank capacity from 4,000 to 10,000 liters depending on the type of vehicle

– The sludge tank material is made of ST37 steel with a thickness of 7 mm with yielding and proper tensile strength and has two turbulent blades. The tank is equipped with reinforcing rings to increase its resistance to pressure and vacuum, and these rings are created by cold forming. The thickness of the lenses at the top and bottom of the tank is 8 mm.

– With DN100 sludge drain and suction valve made in Western Europe with Quick Coupling with PVC hose with Teflon helix resistant to twisting, vacuum and temperature tolerance of -10 to +20 degrees Celsius with high flexibility and stainless steel filter

– Equipped with safety system to control pressure and vacuum inside the tank

– Equipped with secondary system for relieving pressure inside the tank (Relief Valve)

– Equipped with automatic vacuum shut-off system when filling the tank

– Has a four-way valve to change the pressure and suction of the vacuum pump

– Has a fluid level indicator inside the tank as (Sight Glass)

– All welds in the construction of the tank, chassis, structures and all metal parts of the machine are of CO2-MIG-TIG type, which has a test certificate at every stage of welding.

– All surfaces inside the tank after preparation with Plast shot after phosphating with two coatings ZincRich and then with a special epoxy paint with a thickness of 350 microns, which creates a very strong coating and makes the tank very long lasting

– Equipped with the location of suction and thrust hoses away from direct sunlight and with easy access

– Waterjet pump chassis is made of AHSS steel, which is shaped by laser cutting.

– Equipped with the latest waterjet pressure circuit system with stainless steel three-way valve

– Has 120 meters of high pressure hose HP (High Pressure) with working pressure of 280wp bar and minimum burst pressure of 650BP bar with anti-corrosion and corrosion coating, containing non-steel fibers, in accordance with Western European standards, for washing sewer networks

– Automatic high pressure hose pulley retractor system (hydraulic)

– Ability to rotate the complete set of HP hose pulley and control panels around its axis up to 180 degrees and can be locked and fixed in any position

– Equipped with emergency shut-off switch in all functions of the waterjet device in case of danger

– Has a primary safety system of high pressure control (Unloader Valve)

– Has a high pressure secondary safety system (Relief Valve) to protect the pump from operator error

– All hose connections according to Western European standard BS970230M07

– Equipped with three dewatering systems and simultaneous dewatering and washing

– Has a crane to lift heavy objects up to 500 kg

– Control systems with special design on the back of the chassis for easy operation of the device

– Three toolboxes with appropriate sizes to maintain the equipment needed for dredging sewer networks

– Work lighting system at night and warning signs in accordance with the traffic laws of Iran

– Has warning sensors on the back of the device to prevent collisions with obstacles

– Has a CCTV camera for rear view of the driver with a suitable monitor installed in the driver’s cab

– Has a complete set of nozzles for washing sewer networks with HP hose conductor

– Equipped with emergency shut-off key in all functions of the sludge device in case of danger

* The device has one year unconditional warranty and ten years after-sales service for all equipment installed by Sial Mechanic Company